Wiskind One Piece Modular Cleanroom Corner Systems Integrated Corner System

For clean rooms, GMP Article 49 stipulates that the inner surface (wall, floor, ceiling) of the clean area should be smooth and smooth, free of cracks, tightly interfaced, free of particulate matter, to avoid dust accumulation, easy to clean, and should be carried out if necessary disinfection.

The common clean room is that the modular wall panel is connected with the aluminum profile to form a closed clean room. However, due to the large thermal bridge of the common corner plate, it is easy to accumulate dust at the contact position between the aluminum profile and the plate.

Moreover, it is not convenient for cleaning and disinfection. This is also the main reason for the easy collection of dust at the corners and louvers that are common in our lives.

In order to solve the industry problems, Wiskind has invented one piece modular cleanroom corner systems integrated corner system (has applied for national patent), L-shaped overall corner, T-shaped corner, L-shaped corner and T-shaped corner composed of return air column.

By comparing with our patented product integrated corner plate, we can find that by making the plate into an integral corner plate, the corner position can be smooth and smooth, without crack transition, the interface is more strict, and there is no air leakage. The overall corner angle is also thickened at the corner position. Through thermal analysis, we can find that after the whole corner is formed, the thermal bridge phenomenon is basically solved, and a smooth and smooth transition is achieved.